Top 10 usual forklift crashes ， forklift procedure must take note of these matters ！.

Top 10 usual forklift crashes ， forklift procedure must take note of these matters ！.

Blog Article

Do not underestimate the forklift at the workplace. If the operation is not good, there will be serious accidents in minutes, and there are many mishaps including forklifts.

Situation 1: The forklift freight blocked the chauffeur's sight, and the individual ahead might not be found, resulting in a moving crash.
Case 2: In order to maintain the balance of the forklift when lifting hefty items, the employees used their body weight as the weight, which almost created casualties.
Case 3: The width of the forklift cargo exceeds the allowable size of the route and hangs on the roadside shelf, which nearly triggers an mishap.
Instance 4: Forklift is speeding up and rolls over throughout a turn.
Case 5: The forklift motorist did not see the pedestrian, and the pedestrian did not discover the forklift.
Situation 6: The forklift lifts the employees illegally, the forklift driver does not put on the seat belt, the forklift lifter falls and the vehicle driver is crushed when the forklift rolls over.
Instance 7: The forklift vehicle driver did not wear a seat belt and fell from the car when it rolled over and was crushed.
Forklift procedure must take notice of these matters ：.

Begin.
1. Before starting, observe the surroundings, and after verifying that there are no barriers that impede the safety of driving, beep the horn first and then start.
2. For vehicles with hydraulic (air pressure) brakes, the brake hydraulic stress ( atmospheric pressure) gauge should be risk-free prior to beginning.
3. When the forklift begins with a tons, the driver should initially confirm that the tons is steady and reputable.
4. The beginning must be slow-moving and steady.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the pole must be tilted in reverse. .
2. Do not lift the fork too high when driving. When entering and leaving the job site or while driving, take care that there will be no barriers overhead. When the lots is taking a trip, the fork needs to not be increased too expensive, which will affect the security of the forklift. .
3. After unloading, the fork must be reduced to the typical driving position before driving. .
4. When transforming, if there are pedestrians or vehicles nearby, the driving signal must be released initially. High-speed doglegs are forbidden. High-speed sharp turns will certainly trigger the automobile to lose lateral security and topple. .
5. When the forklift is downhill, it is purely forbidden to shut off the fire and slide, and it is forbidden to brake instantly while driving with tons unless there are unique scenarios.
6. When the forklift is running, it has to obey the website traffic rules in the manufacturing facility and have to maintain a particular safety and security range from the car in front. .
7. When the forklift is running, the lots must remain in the lowest placement that does not prevent the driving, and the gantry needs to be appropriately tilted back. The lots shall not be increased except when stacking or loading. .
8. The elevation of the tons need to not block the motorist's sight. In unique conditions, when the item affects the forward vision, drive at a reduced rate when reversing.
9. It is restricted to switch on the ramp, nor to drive throughout the ramp. .
10. The safe driving rate of the forklift in the factory area is 5 km/h, and it needs to drive securely at a reduced rate when going into the production workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for personnel to stand on the fork to hold things and play a stabilizing role. .
12. If problems are located, they will certainly be repaired and reported in a prompt way, and they will never ever run with diseases or conceal them.

filling and discharging.
1. When fork-loading items, the range in between both forks ought to be adjusted as required to make the tons of the two forks well balanced and not skewed, and one side of the thing ought to be against the shelf. .
2. It is forbidden to collaborate with a single fork or use a fork top or pull. In unique scenarios, security indication should be established to remind bordering pedestrians. .
3. In the process of packing and unloading products, the forklift must be stopped with the brake. .
4. The speed of the automobile should be slow-moving and steady. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt people. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the load, and it must be noted that the fork suggestion need to not touch other products or things. The load must be stabilized with very little back tilt of the gantry to make sure that the load does not slide in reverse. The pole can be tilted ahead a little when the lots is lowered to enable very easy placement of the tons and removal of the forks. .
6. It is restricted to fork goods at high speed and hit tough objects with the fork head. .
7. When the forklift is working, it is prohibited for individuals to loaf the fork, so regarding avoid the collapse of the goods and harm people. .
8. Straining is banned, and it is banned to use forks to lift workers to take part in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not allowed to use the brake inertia to slip, put, round or roll items. .
10. It is not enabled to utilize forks to select, transform pallet dump.

Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you must unload the goods or lower the fork frame.
2. Draw the parking brake handle to dead or depress the parking brake button.
3. The engine is switched off and the power is removed. (Except for unique conditions, such as the vehicle driver does not leave the lorry's view and does not go beyond 1 min).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Before and after the forklift procedure, the look must be inspected, and fuel, lubricating oil and cooling water need to be included.
2. Inspect the security performance of starting, running and stopping.
3. Inspect whether the lights and horn signals are total and effective.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature level are regular.
5. After the forklift is running, the outside leakage should additionally be inspected and the seals ought to be replaced in time.

Forklift Safety Operation Specifications.
1. You have to inspect before leaving the vehicle;.
2. When you come across someone before you throughout driving, you ought to send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be too sharp to stop the tendency of " cost-free switching";.
6. Running up and down the incline should be slow-moving and uniform, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is more Electric Forklift Truck for Warehouse than 10%, the car should be driven in reverse when going downhill;.
8. When the forklift workers carry the goods and progress, if they encounter big or hefty products and most likely to the chauffeur's view, they ought to take the turning around exercise
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for long distance driving.
3. It is not permitted to pick up the goods by handing over the pallet Stand-on Electric Pallet Stacker with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to use inertia pressure to grab the goods.
6. It is not allowed to utilize stopping pressure to exile round or easy-to-roll objects.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is elevated.
8. Do not drive side to side on slopes
.
Auto parking is not allowed under the list below conditions.
1. Curves, narrow roads, railway crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an obstacle on one side of the roadway, the opposite side of the area with the exact same size as the challenge need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844